Welcome To OCPerformance Parts LLC.

NOTICE: All intakes and parts are for use on non polution controlled motorvehicles!

Carbureted Dual Plane Intake $679.00

Early 5.7L, Eagle 5.7L, 6.1L, 6.2L, 6.4L Apache

All OCP Dual plane intakes come with a billet CNC machined breather/oil filler fitting, a 2" open element breather, 2 stainless MAP sensor retaining screws, 2 brass fittings (90deg and a 45deg), a PCV valve grommet, and a PCV Valve (The one included is a 90 degree PCV Valve, a straight valve is available at local auto parts stores if it helps you with your installation)

Bare EFI Dual Plane Intake $779.00

Early 5.7L, Eagle 5.7L, 6.1L, 6.2L, 6.4L Apache

All OCP Dual plane intakes come with a billet CNC machined breather/oil filler fitting, a 2" open element breather, 2 stainless MAP sensor retaining screws, 2 brass fittings (90deg and a 45deg), a PCV valve grommet, and a PCV Valve (The one included is a 90 degree PCV Valve, a straight valve is available at local auto parts stores if it helps you with your installation.) This intake does NOT include fuel rail hold down brackets although they have been machined for them. They are purchased separately and are listed below.

DBW to 4150 Adapter kit $99.98

Kit includes, 6061 T6 CNC machined billet adapter plate, Stainless hardware, fiber manifold gasket and Cometic throttle body gasket. Just the lower plate only. No air horn. An IAT must be installed into the air cleaner piping.

Cometic Heavy Duty intake gaskets Early 5.7L $49.54

A very hard to find part is intake gaskets for the early 5.7L engines because all of the factory intakes used o rings. Look no further!! These very high quality Cometic aluminum gaskets are covered in a highly compressible felt type material for a leak proof seal. Setup for a stock port early 5.7L but can be trimmed to fit a ported head.

Stainless Metric Intake bolt Kit $19.95

All of the bolt holes on my dual plane are standard American threads but the bolts that retain the intake to the head are another story. One of the biggest pains in the neck is finding metric bolts for your install in the correct length. I have taken all of the guess work out for you!! 10 Stainless metric bolts, lock washers, and flat washers set up for the OCP Dual Plane!

Billet fuel rail hold down kit $119.95

This set of 4 billet fuel rail hold down brackets and stainless hardware has been designed for use with stock 6.1L fuel rails or almost all aftermarket billet rails. They do not come with the intake and the kit must be purchased separately.

Billet fuel rail hold down kit W/Intake fasteners $129.99

Special!! Save on the Billet fuel rail hold down kit and Stainless Metric Intake bolt kit combo!

Full DBW old school adapter  $298.97

This complete adapter kit is set up for the people who want to use an old school round air cleaner, that OEM high dollar air cleaner, or someone who wants as many plug and play parts as possible for an OEM computer install. It fits a standard 5 1/8" air horn air cleaner asembly. This kit is for stock or ported Modern Muscle Xtreme 85mm stock car DBW throttle body. The kit is complete with mostly stainless hardware, all gaskets, 6061 T6 billet aluminum lower adapter plate, 6061 T6 billet aluminum air cleaner adapter, and 6061 T6 billet aluminum air horn with an integrated IAT boss. You supply the car IAT sensor and install it. No drilling or modifications necessary!!